8x4 Wall Mounted; Upright ply cutter

[JAZZCNC]

Ok well here's my 2 cents.!

I completely agree with Boyan(Silyavski) and get what he's saying completely. (Thou I don't agree with some of the OTT building happening which he as IMO done but that's another issue and is IMO others do and will disagree)
I also Know Matt and get exactly what he's done. Which IMO He's hit the nail on the head and I applaud him for building a machine to do exactly what it says on the tin, which is Chomping thru ply wood.

Now the thing that bothers me here comes from experience speaking and helping others and knowing how people see an react to build threads.?
Newbies don't see this machine was built for low level purpose(even thou it was stated at beginning) or will realise this machine is limited in accurecy.!!
They just see a machine built quickly and with limited budget and tools and think that it's easy.! . . .Only after getting far into the build or finishing do they realise there is a little more to it than just throwing some steel together. End result is at best they are dissapointed in the results as it's not what they thought it would be or worse doesn't work and they give up.!!

Unfortunatly building any machine with decent accurecy levels does take some effort and expense which is what Boyan was saying and 100% correctly IMO.
Now I've shouted loud enough for the "Techno Crap" and OTT building to be curbed and some degree of sanity and common sense to applied. But there are occasions like this one where thru NO ONES fault the waters get muddied.!!

I'm in NO WAY having a dig at Matt or the machine because it's done and is doing exactly what it was built to do.!!. . But New builders and lurkers I feel need to be aware that this machine is limited in accurecy so if taking this route don't expact high accurecy you see on some other machines.

Matt as Done a great JOB in the short time but there's a reason.?? . . . . .He's ADDICTED TO CNC and got OCD. (join the club)