Can anyone recomend the best books for learning CNC milling?

**charlieuk** · 26-12-2014

I cant offer a huge amount but your welcome to take a look at what I have done. I was in a similar situation a year ago and some one offered the same which helped me so maybe it would hlp you a little. Im not the best person to probably seek advice but I couldn't find any one else on the south coast.

I think we could defiantly come up with a page on here that has a explanation and a few pictures of what a basic system is and all the terms and abbreviations mean. Its taken me a year to understand the basics of micro steps till I looked on Wikipedia lol

**suesi34e** · 26-12-2014

Hi Charlie,

Thank you for your msg. I do not find learning CNC easy! I will study your threads and look on Wikipedia. It is the CAM and writing G code if find a bit tricky, I can see what the commands do but I get a bit of a job when it comes to putting them together.

Many thanks

Suesi

**EddyCurrent** · 26-12-2014

This site has a lot of info;
http://www.cnccookbook.com/CCCNCGCodeCourse.htm

**IanS1** · 26-12-2014

With todays CAD/CAM software, I would have thought learning anything but the basics of G Code isn't really needed to get you started in the world of CNC. I would be looking to master the CAD/CAM software and then examine the G Code output to see how it works against your CAD model. You will soon get to know G Code working this way.

**JAZZCNC** · 26-12-2014

Tell you what Suesi why don't explain which aspects you struggle with the most and lets see about doing a tutorial on each aspect.
Or suggest a part you want to make and we can take from start to finish.

It will probably need to be kept to basic principles rather than software specific unless I have the software you use.? In which case I don't mind making a video showing how I would approach and make.!

**suesi34e** · 26-12-2014

Hi Jazz

Many thanks for your msg and offer to help I will take you up on that for sure. What you say makes a lot of sense.

This is where I am at:

I have the mill, AutoCAD and mach3 up and running (I did have Lazycam but the PC I had that on has a temporary issue. I will do some drawings for some 2D parts I would like to make.

I think I could do with adjusting the Z axis as at the minute the collet nut could go down through the table if I made an error, I don't see sense in having it set like that as I must have some material on the bed with some cutter projection.

I think then I need to get some CAM software I was thinking of BobCAD V24 as I can get that reasonable or CamBam. I do not know which is best. I guess once I have the software I will have a go with the CAD drawing and if I am still in the dark ask you Jazz for some help!

Many thanks

Suesi

**EddyCurrent** · 26-12-2014

Originally Posted by suesi34e

I think then I need to get some CAM software I was thinking of BobCAD V24 as I can get that reasonable or CamBam. I do not know which is best.

I use CamBam, at first I thought it was basic and limiting when compared to other CAM software but the reverse is true. It includes some good CAD features for 2D work, lets you tweak loads of parameters, and can use scripts and plugins that users write to expand it's capabilities. It looks a bit daunting at first because it's 'nuts & bolts' rather than 'glossy brochure' stuff.

**suesi34e** · 26-12-2014

Hi IanS1
Thanks for your msg.
Perhaps I was trying to do things a bit back to front I see what your saying
Tar very much
Suesi

**JAZZCNC** · 26-12-2014

Ok well first I'll say forget Lazy cam it's hard work, outdated and unsupported.

With auto cad your half way there which is good and if you can use it all the better.

Next get some Cam software sorted ASAP. BobCad cam is Ok-ish and I do have it thou don't use it much these days but it will help you as I know it very well and it's a quirky program to use so having some one show the quirks will help.

To be honest half the battle with any Cam software is adjusting to how the actual software works rather than learning how individual cutting stratergies etc work.!

Like Ian says forget learning G-code at the minute. In practise you'll only want to learn G-code so you can monitor what's happening in Control as the G-code is ticking away or maybe the odd MDI (manual data input) command for setting up etc. Very rare do you write G-code for actually cutting anything these days.

**suesi34e** · 26-12-2014

Hi Jazz,

Thank you for that. I see you have bobcad is it v24? Is there a better software for me to go with without spending silly money? I can draw in AutoCAD 2D OK not so go good on the 3D side of things, I just don't get time to play with it enough. If you cant think of anything better than bobcad I will go for that and see what we can do. I really appreciate your offer to help me, it should dig me out of a very deep hole!

Many thanks

Suesi