Thread: maximum amps
Threaded View
-
25-05-2009 #1
Hi Can anyone give me some advice. I have purchased a driver board which allows the maximum current to be set for each stepper motor, the permissable values are 1, 1.5,2 and 2.5 amps, My motors have a rated current of 1.4 amps (4.34 volts) for bipolar parallel and 0.7 amps (8.68 volts) for bi polar series. My question is, should I be setting the current below the rated current of the motors or just above ?
Many thanks
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
dc amps vs ac amps
By Lee Roberts in forum General ElectronicsReplies: 18Last Post: 27-03-2021, 10:56 PM -
maximum deflection - sanity check
By dsc in forum Gantry/Router Machines & BuildingReplies: 6Last Post: 11-02-2013, 09:33 AM -
Maximum size of box section, Stacking box section, Construction Angle
By andy586 in forum Gantry/Router Machines & BuildingReplies: 0Last Post: 01-02-2013, 05:29 PM -
Maximum length guideline for a standard 16mm ballscrew?
By WandrinAndy in forum Lead Screws, Nuts & SupportsReplies: 5Last Post: 01-11-2012, 12:27 AM
Bookmarks