Quote Originally Posted by dudz View Post

I am confused about the heated bed platform. I saw these on ebay but they are the thermistor type : http://www.ebay.co.uk/itm/3213363497...84.m1436.l2649
It doesn't matter. If you buy the thermocouple controller it has input for 2 thermocouples , so just add /screw, stick or whatever/ the second thermocouple to the bed


Quote Originally Posted by dudz View Post
The better of the extruders (whichever that one is ?)
The bulldog XL already comes with the reduction motor so it seems better choice.

The setup i am suggesting seems will cope with all materials possible and i have heard only good things for the separate parts. However to be sure just ask before purchase is the prometheus will fit the bulldog.


Also check what they have at the bulldog site , to save on shipping, seems they have almost everything. Seems their hexagon hot end is also a good choice. http://forums.robo3dprinter.com/inde...-hot-end.1888/


This is the original seller web but in USA .


Some dimensiones and details. there is a good thing that it can be mirror mounted .


What i have not decided is bowen or direct setup/ extruder at the back of the machine or on the Z/