Hybrid View
-
18-06-2019 #1
Just FIY on the dust shoes i sell i use 60 cents EVA rubber sheet 1mm or so, found in any chinese shop. On my shoes it could be made into 5 custom length double strips, on a dust shoe like the above, let's say 2. So for 30 cents and some painters tape to hold it on place, you can make much more superior vacuum , custom cut for your current job.
I mean , why are you buying that brush strips that waste vacuum and at the end of the day are no good for all the different bits you would use??
-
19-02-2019 #2
How about this on ebay?
https://rover.ebay.com/rover/0/0/0?m...2F323692003138
Sent from my BBB100-2 using Tapatalk
-
19-02-2019 #3
Hi
There are plenty of suppliers of industrial brush strip in the UK
https://www.google.com/search?rlz=1C...mg.eEZmZ233f4M
.au
https://www.google.com/search?rlz=1C...mg.fT0hhNjxoKQ
-
20-02-2019 #4You think that's too expensive? You're not a Model Engineer are you? :D
-
20-02-2019 #5
You could also try the wonderfully named http://www.thehairyworm.co.uk/
-
08-05-2019 #6
I used this flexible strip from Amazon. Dirt cheap and works a treat.
https://www.amazon.com/Konmison-Clea.../dp/B01566L6Q4
Kit
-
08-05-2019 #7
Hi Kitwn
It is the same one I bought on amazon.co.uk some time ago but not available there anymore!. Good to see it available somewhere. I bought the 70mm and 100mm sizes, but the 70mm is more than adequate
-
09-05-2019 #8
If I remember rightly I had to get mine sent from the USA as it wasn't available on Amazon's AU website.
Kit
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
dust extraction for foam
By charlieuk in forum Dust Extraction & CollectionReplies: 17Last Post: 09-12-2014, 10:25 PM -
Dust shoe bristles
By charlieuk in forum Gantry/Router Machines & BuildingReplies: 18Last Post: 06-11-2014, 03:45 PM -
Open Source Dust Shoe Designs
By Tomnewry in forum Open Source Designs & PlansReplies: 22Last Post: 30-06-2014, 01:51 PM -
Dust Shoe Deisgn
By m.marino in forum Open Source Designs & PlansReplies: 0Last Post: 01-08-2013, 12:19 PM -
Dust collection! Cough!
By Tom in forum Dust Extraction & CollectionReplies: 15Last Post: 04-08-2010, 10:43 PM
Bookmarks