-
19-02-2019 #11
Hi
There are plenty of suppliers of industrial brush strip in the UK
https://www.google.com/search?rlz=1C...mg.eEZmZ233f4M
.au
https://www.google.com/search?rlz=1C...mg.fT0hhNjxoKQ
-
20-02-2019 #12You think that's too expensive? You're not a Model Engineer are you? :D
-
20-02-2019 #13
You could also try the wonderfully named http://www.thehairyworm.co.uk/
-
08-05-2019 #14
I used this flexible strip from Amazon. Dirt cheap and works a treat.
https://www.amazon.com/Konmison-Clea.../dp/B01566L6Q4
Kit
-
08-05-2019 #15
Hi Kitwn
It is the same one I bought on amazon.co.uk some time ago but not available there anymore!. Good to see it available somewhere. I bought the 70mm and 100mm sizes, but the 70mm is more than adequate
-
09-05-2019 #16
If I remember rightly I had to get mine sent from the USA as it wasn't available on Amazon's AU website.
Kit
-
17-06-2019 #17
Hi Everyone
I posted last year about brush strip from Amazon, which unfortunately is no longer available. Now found the same stuff on eBay. So buy whilst it is available!
https://www.ebay.co.uk/itm/70-100mm-...AYq1UxWTvoaEBQ
-
18-06-2019 #18
Just FIY on the dust shoes i sell i use 60 cents EVA rubber sheet 1mm or so, found in any chinese shop. On my shoes it could be made into 5 custom length double strips, on a dust shoe like the above, let's say 2. So for 30 cents and some painters tape to hold it on place, you can make much more superior vacuum , custom cut for your current job.
I mean , why are you buying that brush strips that waste vacuum and at the end of the day are no good for all the different bits you would use??
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
dust extraction for foam
By charlieuk in forum Dust Extraction & CollectionReplies: 17Last Post: 09-12-2014, 10:25 PM -
Dust shoe bristles
By charlieuk in forum Gantry/Router Machines & BuildingReplies: 18Last Post: 06-11-2014, 03:45 PM -
Open Source Dust Shoe Designs
By Tomnewry in forum Open Source Designs & PlansReplies: 22Last Post: 30-06-2014, 01:51 PM -
Dust Shoe Deisgn
By m.marino in forum Open Source Designs & PlansReplies: 0Last Post: 01-08-2013, 12:19 PM -
Dust collection! Cough!
By Tom in forum Dust Extraction & CollectionReplies: 15Last Post: 04-08-2010, 10:43 PM
Bookmarks