Diy dust shoe dust strip bristles

[kresimir.cihak]

I used similar method with brush and pulling bristles(spelling?) out. but I carved around 6x6 mm channel in wooden holder and used hot gun to glue them in. I initially put plastic in channel, filled with bristles, 2,3 cm at a time. then I reinforced them from interior once again to be more firm in position. I don't have any picture on my hand here but can get them if anyone is interested.
Its pretty late here so please excuse my spelling...

Poslano sa mog MI 5 koristeći Tapatalk

[magicniner]

Nice but B&Q also have draught strips for door bottoms with the bristles on a flexible steel strip which you can slide out and bend to shape,
Simples!

- Nick

[MikeyC38]

Hi Everyone

I know that this is an old thread but I found this supplier on Amazon who sells the type of brush material that is perfect for our dusthoods see here

[Snapper]

Hi Everyone

I know that this is an old thread but I found this supplier on Amazon who sells the type of brush material that is perfect for our dusthoods see here

Out of stock, which is a bastard. When I made one I just cut up loads of really thick ziplock bags into strips and glued it in. Couldn't find any decent brushes that lent themselves to the application, other than ordering a crap load from China.

[MikeyC38]

Hi Everyone

I posted last year about brush strip from Amazon, which unfortunately is no longer available. Now found the same stuff on eBay. So buy whilst it is available!

https://www.ebay.co.uk/itm/70-100mm-...AYq1UxWTvoaEBQ

[Boyan Silyavski]

Just FIY on the dust shoes i sell i use 60 cents EVA rubber sheet 1mm or so, found in any chinese shop. On my shoes it could be made into 5 custom length double strips, on a dust shoe like the above, let's say 2. So for 30 cents and some painters tape to hold it on place, you can make much more superior vacuum , custom cut for your current job.

I mean , why are you buying that brush strips that waste vacuum and at the end of the day are no good for all the different bits you would use??