Budget Machine for sign industry

[Boyan Silyavski]

AXYZ 6010 3x2 meters Great condition, Must See!!!


Gerber System 48 Plus CNC Router For Sale

Thats Cheap especially if you want full solution. So you can start right away making money.

[JAZZCNC]

AXYZ 6010 3x2 meters Great condition, Must See!!!


Gerber System 48 Plus CNC Router For Sale

Thats Cheap especially if you want full solution. So you can start right away making money.

There's no prices on any of those machines Boyan so how do you work out they are cheap.?

Locust.

Problem is that at the size you want and with the type of material you want to cut then you'll most likely need vacuum to hold down material.
High volume vacuum pumps are not cheap esp for the size your wanting so trying to do this on a budget will be difficult.

The machine required for your needs could be built resonable enough but a good vacuum system could cost nearly the same amount.!

[Boyan Silyavski]

There's no prices on any of those machines Boyan so how do you work out they are cheap.

Sorry mistake, i was assuming they could be had for cheap when you have the cash in the pocket, as they seem complete solution. Anyway, the prices for second hand machines like these are quite clear, at least to me and as you say building it could cost almost the same, with the addons for production i mean.

[alboy]

Hi Locust

I imported mine, it's a 1325 machine that easily takes a full 8x4 sheet have cut mdf, ply, foamboard thin plate, hardwood so far. With the purchase plus cargo, import duty and vat it cost me around 7000 Euros. Came with 3hp 4 bag dust collector and choice of control system. I got the DSP very easy to use, does all that I need it to.

Good luck

Alan

[LOCUST]

Thanks everyone for your replys, most helpful..

[LOCUST]

Hi Locust

I imported mine, it's a 1325 machine that easily takes a full 8x4 sheet have cut mdf, ply, foamboard thin plate, hardwood so far. With the purchase plus cargo, import duty and vat it cost me around 7000 Euros. Came with 3hp 4 bag dust collector and choice of control system. I got the DSP very easy to use, does all that I need it to.

Good luck

Alan

do you have a link to this machine ? thanks

[alboy]

HI Locust have PM'd you.

Al