Thread: Tiny round over for edging
Hybrid View
-
12-01-2015 #1
OK, I am confused here, not difficult I know but.........
What is the function of the bearing when used on a CNC machine?, surely it is not needed??, not like on a hand held router, or am I missing something here like I usually do??Last edited by racerbear02; 12-01-2015 at 10:04 PM.
-
12-01-2015 #2
Because the OP said this, "I have a full router table . . . ", so he's not going to use the cnc machine by the sound of it.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
12-01-2015 #3
OK, so if I wanted to do the same on a CNC, what would I use?
-
12-01-2015 #4
A similar bit without a bearing.
Gerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
-
13-01-2015 #5
-
12-01-2015 #6
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
-
13-01-2015 #7
English site with the 1/16 bit
http://www.infinitytools.co.uk/route...ass-pilot-bit/
Peter
-
13-01-2015 #8
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
those £55 usb bob's and those £5 tb6560 drivers pic for scale of them = tiny!!
By nobby in forum General ElectronicsReplies: 11Last Post: 01-06-2014, 04:40 PM -
NEW MEMBER: tiny
By tiny in forum New Member IntroductionsReplies: 3Last Post: 02-05-2013, 10:15 PM -
WANTED: Need a tiny bit of work done on lathe
By Tenson in forum Items WantedReplies: 4Last Post: 28-02-2013, 12:22 AM -
Tiny tool feedrates
By Robin Hewitt in forum General DiscussionReplies: 7Last Post: 08-09-2010, 02:48 PM -
This tiny keyboard might come in handy :)
By Smiler in forum Gantry/Router Machines & BuildingReplies: 0Last Post: 28-12-2009, 06:30 PM
Bookmarks