Threaded View
-
14-01-2015 #1
Hi,
My name is Steve. I'm a furniture maker and craftsman. I've been looking at getting a CNC machine for a while, mainly for carving letters into Oak.
I've had various different designs going round in my head for months but I've settled on something similar to these...
Something a little smaller than these about 4ft x 2ft
I've contacted CNC4YOU.CO.UK and have a quote of around £2000, which was my budget.
These are the parts I'm looking at...
2x RM1605-C7 ballscrew - 1200mm
1x RM1605-C7 ballscrew -600mm
3x BK12 Ballscrew support
3x BF12 Ballscrew support
1x SBR25uu rail kit -1400mm
1x SBR16uu rail kit -800mm
1x Nema 23 4Nm stepper motor kit x 4 Axis
1x Z Axis 250mm ballscrew with fitted Kress mount
1x Kress 1050
3x Nema 23 stepper motor mount
3x Ballscrew mount ID28mm
4x 8mm-10mm XD coupling 25mm-30mm
I've spoken with them today and they are also quoting me for a USB controller
I'm hoping to go ahead with the purchase of these parts in the next few days to be delivered next week.
I would like help on which bolts I would require and if anybody could point me in the direction of any assembly guides / instructions.
Thank you in advance for you help
Steve
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
New to CNC Machines. Any advise on a low end machine?
By Millatime16 in forum Machine DiscussionReplies: 5Last Post: 05-12-2014, 07:36 PM -
New Build Advise Ive Got Myself So Confused ! Please Help !
By grain_r in forum Gantry/Router Machines & BuildingReplies: 8Last Post: 26-07-2014, 01:21 PM -
plasma advise sought, want to make a a3-a2 sized machine
By nobby in forum Plasma Table MachinesReplies: 1Last Post: 16-07-2014, 02:53 PM -
My new, and first build....comments greatfully received
By berk in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 12-01-2014, 03:15 PM -
Flappy machine - Advise needed please!
By cncJim in forum Machine DiscussionReplies: 22Last Post: 01-11-2013, 03:23 PM
Bookmarks