. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 14-01-2015 #2
    EddyCurrent's Avatar
    Lives in West Cumbria, United Kingdom.
    EddyCurrent
    Last Activity: 02-10-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,197. Received thanks 276 times, giving thanks to others 110 times. Is a beta tester for Machinists Network features.
    Quote Originally Posted by fentiger View Post

    I'm hoping to go ahead with the purchase of these parts in the next few days to be delivered next week.

    Steve
    Steve, the parts list does not include any electronics such as the stepper drivers etc. also it does not include the aluminium frame.
    All I will say is this, I think you could build a better machine for the same price by getting advice from here.
    I appreciate the build you propose might be easier than welding a steel frame for example but it depends on the quality you are looking for.
    Have a look at some of the build logs here first. http://www.mycncuk.com/forums/253-DI...ter-Build-Logs
    Last edited by EddyCurrent; 14-01-2015 at 11:01 PM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New to CNC Machines. Any advise on a low end machine?
    By Millatime16 in forum Machine Discussion
    Replies: 5
    Last Post: 05-12-2014, 07:36 PM
  2. New Build Advise Ive Got Myself So Confused ! Please Help !
    By grain_r in forum Gantry/Router Machines & Building
    Replies: 8
    Last Post: 26-07-2014, 01:21 PM
  3. plasma advise sought, want to make a a3-a2 sized machine
    By nobby in forum Plasma Table Machines
    Replies: 1
    Last Post: 16-07-2014, 02:53 PM
  4. My new, and first build....comments greatfully received
    By berk in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 12-01-2014, 03:15 PM
  5. Flappy machine - Advise needed please!
    By cncJim in forum Machine Discussion
    Replies: 22
    Last Post: 01-11-2013, 03:23 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules