Fine detail Wood.

[Boyan Silyavski]

ps. Forgot to tell you. The 3 FLUTE CARBIDE ENDMILLS - 0 HELIX Kyocera Tycom he sells are brutal. I use the 1/4 constantly and could say its the best ever router bit for wood i used. Now i saw that he has 1.6mm ones. and 2.4mm ones .

These are or could be even better than the 2 flutes fishtail in certain scenarios. I did not know he has so small of them. The photos does not do them justice, so sharp and shiny are they in reality. I like them better for soft woods especially if the wood has nasty fibers.

[Leadhead]

silyavski
Ordered some 1.6 from drillman1. Thanks, tested my schoolboy Spanish!!!!

[Boyan Silyavski]

ha ha, i send you the link from ebay.es , forgot about that.

The savings are considerable. For example what bit he sales for 6$ is 20€ here in Europe , from the German Kyocera branch.

[fifa]

I am doing fine carving with mini saw cutter angled at 45 deg and 6 mm in dia. It last much longer. Cleaning with virgin V cutters.
V cutters are cheap and can be resharpened with polishing on glass table.

Maple is not the best but it is much better than beech. 3d deep, maple can be squared.

regards