Thread: Chinese 40W Laser vs. Plexiglas
Hybrid View
-
19-01-2015 #1
Last Activity: 29-07-2017
Mine is a diy effort with a cheap Chinese 40w tube. Remember that the thicker you cut the worse the kerf becomes. At 10 mm it starts to become quite evident.
CNC routing and prototyping services www.cncscotland.co.uk
ADD ME ON FACEBOOKS
-
19-01-2015 #2
Last Activity: 19-12-2015
Can you find some photos of how bad it looks on your cuts at 10mm?
Also, for the second pass, did you have to adjust the Z, or same height? The cheap 3020 I am talking about has no Z axis or adjustment - you have to raise the material instead, by shimming it, makign you loose the workpiece alignment.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Chinese tooling
By racerbear02 in forum Woodwork DiscussionReplies: 9Last Post: 09-09-2020, 12:41 PM -
Chinese Spindles
By Ricardoco in forum Generic Chinese SpindlesReplies: 123Last Post: 05-12-2016, 12:16 AM -
WANTED: GCc Laser Pro or Epilog Laser Cutter Machine
By Brownhills school in forum Items WantedReplies: 1Last Post: 10-05-2012, 04:30 PM -
help with cnc laser
By swinds in forum Laser Machines & BuildingReplies: 11Last Post: 09-01-2012, 10:15 PM -
new laser
By mike techserv in forum Milling Machines, Builds & ConversionsReplies: 6Last Post: 06-06-2009, 02:17 PM
Bookmarks