Quote Originally Posted by EddyCurrent View Post
If you have a Z probe I would take readings across the work piece to see if the top surface is level. Also in your CAM software is everything flat on the XY plane.
Hi Eddy,

do not have a probe although I have one on the shopping list (amongst other items lol) although I am not sure the DSP system supports probes, trying to find that out. I redrew the design again making sure all was well on the XY plane and still the same problem, very odd.

I have cut other plaques with almost the same size text with no problem, I even tried changing fonts in case the font was causing problems but still the same.

Al