-
27-01-2015 #1
Check out the LSM9DS1 Accelerometer/Magnetometer/Gyro. Would be neat to see someone use this to measure how much movement and vibration is going on in their cnc gantry. Also great for any robotic applications needing these types of sensors as well. Here's a pic and if you want to know more you can go here: https://www.nordevx.com/content/lsm9...meter-and-gyro. Also there's some arduino code at the NorDevX website to get you started.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Dust and Chip extraction for large matrix table machining centre.
By gavztheouch in forum Dust Extraction & CollectionReplies: 2Last Post: 29-05-2013, 10:03 PM -
Compressor specification for alu chip blower
By Saracen in forum Machine DiscussionReplies: 20Last Post: 12-01-2013, 09:17 PM -
Chip load chart
By motoxy in forum Machine DiscussionReplies: 1Last Post: 17-09-2012, 10:05 PM -
PLC/Programmable chip suggestions
By m_c in forum General ElectronicsReplies: 9Last Post: 02-04-2011, 04:40 PM
Bookmarks