Threaded View
-
31-01-2015 #1
Good day all,
I am a student doing a design project on timing belt and pulley with design considerations.
I need to achieve a position accuracy of 1mm. Initially, i thought that a 1mm pitch will do the job, but apparenatly, the pitch and the position accuracy is two different issue. I am very confused of how to achieve it.
Do i need to find a smaller pitch size pulley? (I tried searching but to novalid.)
My current design
Given Centre Distance = 1500mm
Calculated Minimum Diameter of pulley = 3.074mm
Ideally Gear ratio: 1:1
Would apperciate if someone would give me some light about it. Thanks
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Calculating timing belt lengths
By Jonathan in forum Gantry/Router Machines & BuildingReplies: 11Last Post: 10-12-2015, 11:32 AM -
Timing Pulley/Belt sizing software
By m_c in forum Computer SoftwareReplies: 4Last Post: 12-04-2014, 03:33 PM -
timing belt instead of lead screw
By deannos in forum Gantry/Router Machines & BuildingReplies: 28Last Post: 06-03-2012, 08:25 AM -
Timing belt drive concept, would this work?
By psiron in forum Belt Drive, Pulleys & TimingReplies: 8Last Post: 16-06-2010, 03:31 PM -
Timing belt instead of rack!
By ptjw7uk in forum Belt Drive, Pulleys & TimingReplies: 8Last Post: 18-12-2009, 12:49 PM
Bookmarks