how to operate chinese spindle from ebay

[valeria caltabiano]

Hi, i have got a WATER-COOLED SPINDLE MOTOR 2.2KW INVERTER VFD 2.2KW VARIABLE FREQUENCY DRIVE q4 from China from ebay. both the cable that connects the motor to the spindle and the hydraulic pump are missing and the supplier said that it does not come with them. How would you operate the spindle without these items? The supplier does not seem to give me an answer. If I do need these items, do you know where i could get them? Any help would be extremely appreciated . Many Thanks

[dazza]

its how they all come,you should have a connector that screws onto the top of your spindle but you will have to get your own cable and water hose.
there are posts on here regarding wiring and set up somewhere.

[valeria caltabiano]

many thanks Deisel :)

[Clive S]

its how they all come,you should have a connector that screws onto the top of your spindle but you will have to get your own cable and water hose.
there are posts on here regarding wiring and set up somewhere.

http://www.mycncuk.com/threads/5814-...ce-More/page12 #6 gives some help with the setup ..Clive

[valeria caltabiano]

what would be the best water pump for this machine? I have seen that some users use quite powerful ones and others use quite small ones...which attachments does the pump need to have? does anyone have some links to show me examples? many thanks

[dazza]

im just using a cheap £15-£20 pond pump submerged in the water tank.get the correct clear water hose that fits the two unions on top of the spindle that came with it, run these two to your water tank.
only one of the hose will fit to the pond pump the other just drops into you tank as a return.
what ever pump you get you just need to source or make 1 reducer that steps down from the pumps connecter to the diameter of the spindle hose.

[valeria caltabiano]

thank you very much

im just using a cheap £15-£20 pond pump submerged in the water tank.get the correct clear water hose that fits the two unions on top of the spindle that came with it, run these two to your water tank.
only one of the hose will fit to the pond pump the other just drops into you tank as a return.
what ever pump you get you just need to source or make 1 reducer that steps down from the pumps connecter to the diameter of the spindle hose.