Thread: Bluumax build help
Hybrid View
-
17-02-2015 #1
Last Activity: 28-05-2023
Have a look at this http://www.bluumaxcnc.com/index.html
-
17-02-2015 #2
Last Activity: 02-12-2020
Thanks chap. I have been there and had a look at the Home page and the gantry setup page at http://www.bluumaxcnc.com/Gantry-Setup.html. I was hoping someone had got the step-by-step guide for any tips, help and gotchas as I am building the machine...
Cheers
-
17-02-2015 #3
Last Activity: 02-12-2020
Whoops deleted double post :)
Last edited by glynd02; 17-02-2015 at 07:11 PM. Reason: Double post
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: a Steel Box Section Build with SBR20 & Ballscrews Plus a few questions
By grain_r in forum DIY Router Build LogsReplies: 130Last Post: 27-01-2023, 06:47 PM -
BUILD LOG: New Build - For Your Amusement - MK-2 build
By Karl in forum DIY Router Build LogsReplies: 12Last Post: 08-02-2017, 08:03 PM
Bookmarks