8 x 4 sheet capability

[JAZZCNC]

Maybe consider an ATC which would require an additional area. G.

Geoffrey Guy is struggling to get his head around needed cutting size don't blow is brains out by suggesting ATC. .

Neil's suggestion of knocking a drawing up is sound advise and well worth the effort, esp if space is tight.?

[GEOFFREY]

Jazz, I did not mean to complicate or confuse, I was only adding to Ger21's post. G.

[JAZZCNC]

Jazz, I did not mean to complicate or confuse, I was only adding to Ger21's post. G.

I wasn't critising you Geoffrey it was a good valid suggestion just found it funny when poor lads is still trying to workout basics and you hit him with ATC.