redsail m500

[gavztheouch]

The pc software/drivers will be quite specific to the board running inside the laser cutter. Where did you buy the laser?

Can you upload files to the laser from a usb memory stick?

[calida]

it doesn't let me upload from USB stick. I've had it looked over by someone more knowledgable than me, seems to be just software issues....i've been sent laserworks/lasermate and it doesn't load right. I'm using windows 8.1.
Calida

[gavztheouch]

Can you move the head around with the arrow keys.

[calida]

Yeah and the laser fires; everything has been tested it just doesn't talk to my computer.

[EddyCurrent]

So have you unzipped the drivers and installed them now ?

[gavztheouch]

I had endless problems with usb controller with my laser in the end I used the network cable option and have had no further problems it also doesn't need a driver but your laser might not have the network option.

[calida]

How would i know if it had this option and what would i do to work it like this?

[calida]

I've downloaded both USB drivers and attempted installation; one says driver install failure and the other isn't a file which runs.