redsail m500

[cropwell]

I had a problem with drivers for a device and from the system screen in control panel I found the hardware_id associated with the device. I copied the value into my browser bar and did a search and it came up with a site for the drivers. I can't remember the exact details of where to find the hardware_id, but it was probably under driver details in the property tab for the yellow "?"-d device. The boards these machine use are often designed with a standard comms protocol.

[sthdklen]

Hi I've just got one of these redsail lasers and had nothing but problems. I've done a couple of test cuts. I drew a simple square and a circle and set power speed to cut. Each time the shapes are stretched circles are ovals and it only engraves no matter what setting I set they don't cut or produce the correct shape. Any ideas, seems like the machine is misinterpreting the software or something :-(