. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 24-02-2015 #4
    routercnc's Avatar
    Lives in West Midlands, United Kingdom.
    routercnc
    Last Activity: 4 Days Ago Has been a member for 9-10 years. Has a total post count of 1,723. Received thanks 403 times, giving thanks to others 75 times. Referred 3 members to the community.
    Spindles themselves are much quieter than routers and once you have one there is no going back. However the noise of the cutting tool in the workpiece is still quite high and if this still bothers you then you need an enclosure around the whole machine
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to routercnc For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Drawing of water cooled spindle
    By GTJim in forum Spindles & Drive Motors
    Replies: 5
    Last Post: 11-02-2014, 04:21 PM
  2. Do you need to water cool erhm a water cooled spindle?!!
    By HankMcSpank in forum Generic Chinese Spindles
    Replies: 18
    Last Post: 02-10-2013, 09:59 PM
  3. Cooling a water cooled spindle, without pipes everywhere & huge water tanks/buckets!
    By HankMcSpank in forum Generic Chinese Spindles
    Replies: 17
    Last Post: 18-09-2013, 06:32 AM
  4. Chinese 2.2 water cooled spindle / Which VFD ?
    By dudz in forum Motor Drivers & Controllers
    Replies: 20
    Last Post: 16-08-2013, 02:22 PM
  5. water cooled spindle
    By alex wight in forum Generic Chinese Spindles
    Replies: 1
    Last Post: 21-09-2012, 09:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules