Steel Gantry Machine 1500x750x200

[toomast]

... To be honest it shouldn't have been released IMO because it's still very buggy and tempramental. Effectively users are being used has beta testers so if you want to just install and go then I'd seriosly suggest you Don't buy Mach4 yet.
It's getting better and the Mk2 update and following updates have really ironed out some of the bugs but it's still too itchy scratchy for me so I'd avoid using it.!! . . . . Lets put it this way I've had it since day one and used it with CSlabs, ESS, Pokeys plug-in's and other than for testing it I won't trust it to run my machine unattended.

PS you don't need a Plug-in to use the PMDX126 it's just a BOB.

Thanks for heads up! They do market MACH4 as ready goods... I will keep away from it for now.

[toomast]

Hi guys,

Is 156.-EUR reasonable price for:
WEST SYSTEM EPOXY 105 - 5kgHARDENER 206 - 1kg?

[JAZZCNC]

Hi guys,

Is 156.-EUR reasonable price for:
WEST SYSTEM EPOXY 105 - 5kgHARDENER 206 - 1kg?

Yes ok price for 5lt but really you want 209 hardner not 206. you need very slow cure time to allow plenty of time for epoxy to level.
I have used 206 before but you get much better results with 209 and not so rushed.

[Boyan Silyavski]

Dean, good that you spotted that number cause it could have made one pull of his hair, if ordered and mixed the wrong hardener

[toomast]

Thanks guys.
Temperature in my workshop is about 5-10c. Should I still go with 209? My supplier does not have 209 in stock...
Or I just keep my pants on until normal temperature arrive?

[JAZZCNC]

Thanks guys. Temperature in my workshop is about 5-10c. Should I still go with 209? My supplier does not have 209 in stock...

Thats to cold you must get it up around 20c and keep it there for 3 days.

[toomast]

Thats to cold you must get it up around 20c and keep it there for 3 days.

Then I will wait and go with 209.
Feeling quite awful for the slow progress...



Sent from my LG-D605 using Tapatalk