Steel Gantry Machine 1500x750x200

**Boyan Silyavski** · 18-04-2017

That is definitely a great success. The cut looks very nice. Chamfer also needs a finishing pass. Same like normal side milling. I am almost sure you did not do that? So no real reason of disappointment. 0.05mm or 0.1mm will do the job next time. Also workpiece needs to be tightened to bed very strong.

**toomast** · 19-04-2017

Originally Posted by Boyan Silyavski

That is definitely a great success. The cut looks very nice. Chamfer also needs a finishing pass. Same like normal side milling. I am almost sure you did not do that? So no real reason of disappointment. 0.05mm or 0.1mm will do the job next time. Also workpiece needs to be tightened to bed very strong.

You are correct, I did not do it. Lesson learned again. Thanks Boyan!