Steel Gantry Machine 1500x750x200

**needleworks** · 16-01-2018

If you are using an adaptive toolpath in fusion, are you also following it with a 2d contour ? In fusion when you use 2d adaptive, there will be an option for "radial/axial stock to leave" You can of course set these to 0, but I always follow adaptive toolpaths with a 2d cleanup contour.
Just a thought !

**toomast** · 16-01-2018

Originally Posted by needleworks

If you are using an adaptive toolpath in fusion, are you also following it with a 2d contour ? In fusion when you use 2d adaptive, there will be an option for "radial/axial stock to leave" You can of course set these to 0, but I always follow adaptive toolpaths with a 2d cleanup contour.
Just a thought !

Yes. In 2d adaptive I leave 0,5mm stock. Which I clean up with 2d contour as a finishing pass.