. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 05-03-2015 #11
    jimbo_cnc's Avatar
    Lives in Bristol, United Kingdom.
    jimbo_cnc
    Last Activity: 15-09-2020 Has been a member for 9-10 years. Has a total post count of 153. Received thanks 1 times, giving thanks to others 1 times.
    OK, so that was a bad thing for me to mention as a requirement to the supplier, I'm correcting that now.

    I have some 6mm wide grooves, and 19mm wide grooves, both about 6mm deep. I was hoping to cut the whole thing with one cutter but swapping is no biggy either.

    What do you recommend if I had 3kW spindle and 6000mm/min ?

    The whole job with 6mm cutter and DOC= 6mm?
    or 6mm cutter for narrow grooves, 10mm for wide grooves and multi-pass for cutting the profile?

    Multipass rough cut the profile, then a full depth finish pass with compression cutter?


    I will be hot glue edgebanding the cut edge, and I've got a choice of chipboard or mdf for the core of the melamine board.
    Last edited by jimbo_cnc; 05-03-2015 at 04:50 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. RFQ: Wood CNC routing service (wood Letters)
    By coujin in forum Projects, Jobs & Requests
    Replies: 0
    Last Post: 16-02-2015, 03:35 PM
  2. Hourly rates
    By newtoid1986 in forum Marketplace Discussion
    Replies: 4
    Last Post: 28-03-2014, 12:28 AM
  3. RFQ: MDF Panels (+ More)
    By codytom in forum Projects, Jobs & Requests
    Replies: 6
    Last Post: 09-04-2013, 09:16 PM
  4. Looking urgently for a miller in Devon,r Exeter. Goods rates paid.
    By mwsufc in forum Opportunities Available & Sought
    Replies: 1
    Last Post: 04-02-2013, 10:42 AM
  5. Noob alert - 'Starter for 10' feed rates for MDF
    By HankMcSpank in forum Machine Discussion
    Replies: 6
    Last Post: 04-06-2009, 01:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules