Thread: belt on belt/servobelt
Threaded View
-
16-03-2015 #1
belt on belt/servobelt.
Does anyone have any direct experience of using this system?
I am looking to build a machine based on this principle.
I will have an 8000mm Y axis and a 1600mm X axis gantry.
The machine will be for fabric cutting so light duty and either a tangential pizza wheel cutter or gantry mounted co2 laser, but either way not heavy loads.
It will need good rapids- 0.5-1.0 meters per second.
I am erring towards a tractor belt small loop acting on a glued down base belt rather than 2 full length belts. Seems silly to use twice as much belt as i need.
thanks for your help!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Which Belt Profile
By manofgresley in forum Belt Drive, Pulleys & TimingReplies: 5Last Post: 27-09-2013, 12:54 PM -
Belt drive on a router
By John S in forum Rails, Guideways & BearingsReplies: 23Last Post: 10-09-2012, 09:39 PM -
Belt Driving your leadscrews !
By Lee Roberts in forum Lead Screws, Nuts & SupportsReplies: 11Last Post: 05-02-2011, 09:14 AM
Bookmarks