Vectirc question. Bit of G-Code help please

[Ger21]

In Aspire or V Carve Pro, you can specify the "home" location, so it goes somewhere else other than 0,0.
You can also edit the post processor to remove that first move.

[Fivetide]

In Aspire or V Carve Pro, you can specify the "home" location, so it goes somewhere else other than 0,0.
You can also edit the post processor to remove that first move.

Hi Ger21 I've managed to reset the machine home to near to the work piece so its working OK now, thanks for the advice