. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 19-05-2021 #1
    Mikes Planes's Avatar
    Lives in Les Alleud, France.
    Mikes Planes
    Last Activity: 01-03-2024 Has been a member for 3-4 years. Has a total post count of 45.
    Hi all,
    I have a similar problem, I keep getting a E stop button Pressed on Mach3 I have taken the leads out but still have it can you help please??
    Mike
    Reply With Quote Reply With Quote
  2. 19-05-2021 #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by Mikes Planes View Post
    Hi all,
    I have a similar problem, I keep getting a E stop button Pressed on Mach3 I have taken the leads out but still have it can you help please??
    Mike
    Most probably electrical noise on your signal lines. Try adding a little De-bounce which you will find in the General config screen. If this works then you should check out your wiring to make sure signal wires are not running too close to high voltage wires.
    -use common sense, if you lack it, there is no software to help that.

    Email: [email protected]

    Web site: www.jazzcnc.co.uk
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Gecko G540 or?
    By JW1977 in forum Gantry/Router Machines & Building
    Replies: 34
    Last Post: 17-09-2017, 05:28 PM
  2. FOR SALE: Gecko G540 Controller & Accessories
    By jeboa in forum Items For Sale
    Replies: 3
    Last Post: 21-09-2013, 09:45 AM
  3. eBay: New Gecko G540 Controller (Rev 8 With Arctic Silver Mounted Heatsink) $1 No Res 3 Day
    By Storm2313 in forum Items On eBay UK
    Replies: 4
    Last Post: 08-05-2013, 11:31 AM
  4. Gecko G540 - local source
    By compfranon in forum Motor Drivers & Controllers
    Replies: 26
    Last Post: 10-09-2011, 07:06 PM
  5. Gecko G540
    By Sparks in forum Motor Drivers & Controllers
    Replies: 14
    Last Post: 29-11-2010, 04:52 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules