Change of PC and now X and Y axis are not doing anything

[Neeps]

Thank you Nick. Off to try that now. I did make a little progress during the middle of the night in a "it's playing on my mind" moment. I found and downloaded "routout CNC" and it sorry of responded. It have some odd movements in response to jog but relatively uncontrolled. But it did at least m move in x y and z. That has made me suspect that the "driver" may be the culprit. Taking the cover of the breakout board now.

[magicniner]

Motor speed and acceleration settings in MACH3 will have a big impact on how your axes run.
I moved the entire setup from my CNC PC to my Laptop by copying files across and all the settings transferred, it might be worth reading around the subject on the MACH3 forum and backing everything up once you get it running again,

- Nick