Thread: Hello from Essex UK
Hybrid View
-
03-06-2009 #1
Hello everyone, I have joined this group because I am very interested in converting a bench top Milling machine to CNC. I am still undecided as to which machine to purchase. I would like one with a dovetail column for positive head location when moving the Z axis. Any advice will be gratefully received.
I have a very small amount of experience in this area having acquired a CNC controlled engraving table with a non functioning control system a while back, I muddled my way through getting interfaced to a PC and working with Mach3.
All the Best
Ivan.
-
03-06-2009 #2
Hi Ivan What part of Essex?
(Us Colchestrians are a little snooty about being called Essex men, referring to it as North-East Essex or Essex/Suffolk boarder ;))
-
04-06-2009 #3
Hi Bill
Stanford Le Hope, Essex.
-
04-06-2009 #4
Not much hope for you then mate.........
.John S -
-
04-06-2009 #5Not much hope for you then mate.........
Hi Ivan, don't let the 'northerners'* put you off; most of them are friendly, some even speak English.
* - Actually, there's a kiwi on the board somewhere, so I guess we're all northerners now :)
-
04-06-2009 #6
Stanford Le Hope ??
Not much hope ???
OK I'll get me coat.
.John S -
-
04-06-2009 #7
Hello John & Bill thank you for the welcome.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: hello from essex
By T0rnado69 in forum New Member IntroductionsReplies: 3Last Post: 20-03-2014, 12:13 AM -
NEW MEMBER: Greetings From Essex
By trounce in forum New Member IntroductionsReplies: 1Last Post: 18-01-2011, 02:06 PM -
NEW MEMBER: Hi from Essex
By baldric in forum New Member IntroductionsReplies: 1Last Post: 11-01-2011, 03:14 PM -
NEW MEMBER: New member from Essex
By swarfy in forum New Member IntroductionsReplies: 1Last Post: 08-12-2010, 01:38 PM -
NEW MEMBER: New Member - Essex UK
By alan2525 in forum New Member IntroductionsReplies: 1Last Post: 16-10-2007, 01:43 PM
Bookmarks