Thread: faster varnishing
-
01-05-2015 #1
hi all, i am wondering what people do to varnish products faster, i have been brushing everything but its taking so long, does anyone use a sprayers and if so what type of varnish and how are u thinning it etc, ps i do not have a compressor so would be an electric sprayer
-
03-05-2015 #2
Not faster in application but a lot faster as a process:
Epifanes rapidclear and rapidcoat are semigloss yacht varnishes that can be re-applied after 6 hours without sanding in between layers.
If you need high gloss then finish with that after a few layers of rapid-.
For me that means that I can varnish all wood on my boat in one weekend.
-
The Following User Says Thank You to Sven For This Useful Post:
-
03-05-2015 #3
Hi
A lot of joiners spray furniture/cabinets do a search for High Volume Low Pressure
(HVLP) sprayers, you get less overspray and use less finish.
Regards
Mike
-
03-05-2015 #4
~In the past, I have used melamine lacquer. The stuff I used dried very quickly and hardened over 24 hours (I think it absorbed carbon dioxide from the air as a catalytic hardener). When it had hardened it was super tough. I sprayed it with a high pressure gun, but in those days HVLP was not invented.
http://www.axminster.co.uk/chestnut-melamine-lacquerLast edited by cropwell; 03-05-2015 at 11:10 AM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks