What 'decent' Milling machine?

[JohnHaine]

Look for denfordata on google to get the mill details as well as lots of info from people who have probably converted them to Mach 3 and / or modern drivers etc. for guidance I spent less than £200 on new drivers, a BoB and smps to get my Novamill working, using the original motors. All the electronics from China via eBay, 2m542 drivers. Psu is 36volt. There were no electronics at all with my mill so also had to use a KB electronics motor drive I already had, but you can use the one in the mill if it's working. Caution however, if it's a dc motor thyristor drive it is NOT isolated from the mains and you will need an isolating circuit to link the drive to your BoB.