Steel Frame 8' x 5' CNC - Advice Sought

[BrentonSpear]

Hi Guys,

I was looking at using 50mm x 50mm x 4mm SHS steel tubing for the frame.

Silyavski, that is an interesting thought. I suppose I could do it in 100x100x4mm SHS. I will have to do the price calculations. I am planning to get all the pieces cut to the required lengths at the place I buy the steel so the size of the SHS is not really an issue.

Clive S, I had always planned to add feet to the frame.

Here is the updated design with the feet in place.



For the gantry I am going to look at how I get a ball screw between the rails of the Y axis.

I think I will put an I beam inside the RHS beam and then remove material to make a void. I have seen other person do this and it looks doable.