Cheap servo drives & motors 200w- 400w , sourcing ? Europe?

[Boyan Silyavski]

Yes. I have a new project in mind. Bluntly said- I want to make and sell the best small machines in the market.

I would like also to be the most affordable for what it offers, so all parts which are not produced by me must be industrial quality but at good price to keep overall price down. I have several strategies to achieve this and one of them is everything to be as easy/ fast/ to assemble as possible.
I have the sketchup design finished. Now i am redrawing it in NX, cause i would like a perfect CAD model. Some time ago i started a thread which i will soon update. There would be also some secrecy, until i am not ready with the prototype. I have 3 standard small machines in mind to sell, all share Z design, rails spacing and so. Already tested design on the yellow machine, my first build, which again i have to note is capable of milling aluminum with perfect finish while Z is fully extended at 200mm and digging 1.5-2mm in the aluminum.

So i decided to start with the 6040machine, moving gantry. There will be 6090 and 4040 fixed gantry.

hence the servo search.