3D Relief work

[petesos]

Hi All
I know its been a while since i posted but have been to busy loosing money ( may as well tell it how it is )
But i was wondering if anyone on here knows of anyone on here that converts pictures to 3D STL relief models to be carved on the cnc

Pete

[dazza]

if your not after a freebie have a look at his work in the link..i don't what his rates are.

http://www.mycncuk.com/threads/5972-...ighlight=veres

[Neale]

Not quite sure what you are looking to do, but PhotoVCarve from Vectric will take pictures and produce "relief" toolpaths. You need to look at the website to see what it can do. Commercial product (i.e. it costs) but free trial available.

I have used 123D Catch to convert a set of photographs of an object to a 3S STL model, then used a freeware programme to turn it into a toolpath. 123D Catch is a free online "service" where you upload your photographs and some time later download a model. I found it difficult to use, but it did work and I took a series of images of an object right through to a machined piece. I think I used Pycam for the 3D toolpath generation although I'm not sure about that now; these days I use the Vectric Cut3D programme (but that one costs as well).

[petesos]

Hi Bud
I have the Cut 3d program and the Vectric 3D but it does not convert a photo to a 3d relief does it ?
Pete

Not quite sure what you are looking to do, but PhotoVCarve from Vectric will take pictures and produce "relief" toolpaths. You need to look at the website to see what it can do. Commercial product (i.e. it costs) but free trial available.

I have used 123D Catch to convert a set of photographs of an object to a 3S STL model, then used a freeware programme to turn it into a toolpath. 123D Catch is a free online "service" where you upload your photographs and some time later download a model. I found it difficult to use, but it did work and I took a series of images of an object right through to a machined piece. I think I used Pycam for the 3D toolpath generation although I'm not sure about that now; these days I use the Vectric Cut3D programme (but that one costs as well).

[phill05]

Have a look at Vectric PhotoVcarve will do all you want.

Phill

[petesos]

Have a look at Vectric PhotoVcarve will do all you want.

Phill

Will have a look

[petesos]

Have a look at Vectric PhotoVcarve will do all you want.

Phill

Had a look at this program yes it does photos but I have a 80 watt Laser that does my photos far better quality than a cnc but the customer wants the Lancaster Bomber to look as though it is flying out of the wall
Pete

[Neale]

Hi Bud
I have the Cut 3d program and the Vectric 3D but it does not convert a photo to a 3d relief does it ?
Pete

No - that's what PhotoVCarve does. I had suggested a couple of ideas but they do very different things. Sorry if my post was confusing.

[petesos]

No - that's what PhotoVCarve does. I had suggested a couple of ideas but they do very different things. Sorry if my post was confusing.

Cheers bud I will go and have a look at that and see where it leads me
Pete

[petesos]

Cheers bud I will check out the link , I dont want a freebe as i need to pass the cost on to the client for this work to be done Pete

if your not after a freebie have a look at his work in the link..i don't what his rates are.

http://www.mycncuk.com/threads/5972-...ighlight=veres