3D Relief work

[Boyan Silyavski]

So you would like to do it by cutting or by laser, i don't understand?

Cause if by laser you need to retouch the file in Photoshop and make it look beveled

Or you need to make it a real 3D with Aspire or similar.

[phill05]

This bike is worked through Aspire and cut into a stone memorial.

[petesos]

This bike is worked t
Pete

Hi Bud
Is this one you have done ??
Pete

[phill05]

Yes it's cut into a Portland stone memorial and you can see the detail you can get but you need to work at it.
This is an STL file and if you set up to turn your blank over to cut both sides you would have a 3d model in full, or cut two seperate sides and attach together.

[Boyan Silyavski]

A bit busy but will try to help. Send file and desired size at costademaria @ gmail.com. send me as much info possible , material, why, what when....

[petesos]

So you would like to do it by cutting or by laser, i don't understand?

Cause if by laser you need to retouch the file in Photoshop and make it look beveled

Or you need to make it a real 3D with Aspire or similar.

Hi Bud yes I want to make it a 3D carving but my skill level is not up to it