Connecting to a CNC machine, pros and cons of USB vs PP vs Ethernet etc.

[JAZZCNC]

This is exactly the same thing as I've done - difference is that I've been called a fair few names plus suggestions of physical violence for my trouble.

Twas a Joke Hence the Jester.!! . . . The names I stand by because to me you where being a ***REMOVED*** for arguing something that wasn't relavant and pointless to the discussion.! My reference to USB motion controllers being troublesome with Mach3 and Ethernet not being was based on Fact thru experience not theory. You where just being provoking IMO.!! . . . I was stupid enough to respond I should have known better.!

Now FFS lets leave it alone.!!

Except this.!!

I included the word 'arbitrary' to try to rule out the use of specialised tooling as used in that video

Nothing specialised about that tool it's just a T-slot cutter.!!!

MODERATED: Section 2 of the Community & Forum Guidelines, points 5 & 6.

What you should NOT do:

• Discuss or link to objectionable and/or offensive topics. This is not permitted and includes but is not limited to: things of a violent nature, pornography, sexism, racism and/or other discriminatory subjects, this includes things considered to be as a “joke”. Religious and/or political discussions or anything considered to be of the same nature are not appropriate for these forums and will be removed from public viewing.
• Create threads and/or posts deemed to be soliciting any kind of harassment, discrimination, flaming, trolling and/or behaviour considered by the site staff as intentionally abusive or inappropriate. Such content will be removed from public viewing.