Connecting to a CNC machine, pros and cons of USB vs PP vs Ethernet etc.

[JAZZCNC]

Would you pair put the handbags down! :)

However, USB can be used reliably. I run several KFlops, and they are far more stable than my USS ever was with Mach3.

No my Hand bag is always read for Action.!!. . Lol

Now Come on M_C we both know you are talking about a very High quality product when using Granite's Kflop controller it's not your average USB Mach3 controller.
The point I was making in first place is that USB isn't stable as Ethernet when used with Mach3 which we know thru experience is true. We Have Both pulled our hair out with USS(USB Smooth Stepper for those we are wondering.!!) and I've done much the same with every other run of the Mill USB controller for Mach3.
Ethernet on the Other hand is another ball Game. Classic example is the Pokeys 56/7E and now 57ECNC which do Motion control they are cheap and work great they never Miss a beat. The 56U on the other hand was a pain when used for motion control with Mach3, mainly I think because it relied on USB for 5v but still it couldn't be trusted.!

USB driven card Isn't ok for Motion control unless your prepared to spend on quality devices like Granite's Kflop etc so to me it's not for the average DIY user and best avoided.! And now with Ethernet devices coming more available at sensible money what the point.!