Denford Triac VMC with ATC Conversion / Fix

[Chaz]

Thanks. I have a question about enabling '0V' for the drives.

Currently, to enable the drives, I need to provide 0V to a certain wire which allows a relay to activate (24V).

I have looked at the wiring diagrams and believe I understand how to wire the limits, E Stop, spindle activate etc.

What I am unsure of is how to enable a 0V grounding to enable the drives. I could reverse the wiring which means that it will switch the relay on, on providing 24V. There seems to be a specific way to do this in the manual as per below. Here, it seems to be for the same purpose but the 24V and 0V are reversed. Is this what I need?

There is also an option for 'low active', does this inverse the logic to satisfy the current need for 0V?



On the topic of the 24V PSU, if you look carefully, there is a bridge there .... :-(