Denford Triac VMC with ATC Conversion / Fix

[Chaz]

You could probably replace the transformer with a single phase one provided the overall rating is sensible. Or replace the whole PSU.

If it is a DC motor with the usual thyristor controller then that will probably run happily from single phase with some careful re-wiring. Actually checking the manual you referenced above it has a single phase mains connection anyway!

The coolant pump is more of a problem but its power is probably low and you can run 3 phase motors from single phase using some capacitor trickery - or use a cheap inverter - or replace the motor - or dispense with pumped coolant!

Yep, this might not paste well, but apart from coolant pump, nothing else uses 3 Phase.

	Control Logic	Voltage	Current	Controller / Driver	Comments
X Axis	+/- 10V	220V		IRTA 1306
Y Axis	+/- 10V	220V	Fuse	IRTA 1306
Z Axis	+/- 10V	220V		IRTA 1306
Spindle		220V	10A	Sprint Electric 1200	DC Motor - 12 Amps?
ATC Motor		220V	3.15A
Coolant		415V
Lighting		12V			50VA
Monitor		220V