Denford Triac VMC with ATC Conversion / Fix

**i2i** · 16-06-2015

Chaz, if you need any help i can pm you my phone number for a chat about this machine. It's a pretty easy conversion to mach as everything bar the coolant pump will run on single phase and the coolant pump will run off an inverter in delta. I had the same machine here and ran it for ages before i went to a bigger mill.

ps. it looks like all the pneumatic controls are missing, unless they're in the base of the box.

**JAZZCNC** · 16-06-2015

Originally Posted by i2i

Chaz, if you need any help i can pm you my phone number for a chat about this machine.

Chaz don't mess around on here phone the man ASAP.!!

**GEOFFREY** · 16-06-2015

Originally Posted by JAZZCNC

Chaz don't mess around on here phone the man ASAP.!!

Great buy Chaz, well done. I have had several Easy/Star/Nova mills and thought the Denford quality very good. You can easily run the coolant pump from 230v single phase in delta using either an inverter or caps (caps are very easy, very cheap). I have never met or spoken to i2i, but have heard from a couple of sources that he has converted quite a lot of Denfords. Good luck with this project. G.