Denford Triac VMC with ATC Conversion / Fix

[Chaz]

Engine hoist or pump/pallet truck, tho you could just use steel bars and roll it on those into place, will need to of you to do it safely.

.Me

Ye, thanks. I almost could not close the garage door and fortunately managed to squeeze is past the machine.

I can get to most of the bits now for fixing but it will need to be moved once working - its currently literally just in the middle of a double garage, not ideal.

Ill look at a hoist, but didnt see a lifting nut on the machine although the docs show this. Does it normally come with the machine or do you need to buy this separately?

For a pallet truck, would need to find a 'gap' under the machine to lift with or am I missing something?