Quote Originally Posted by JAZZCNC View Post
Chaz i2i offered help I strongly advise you to take him up on his offer. You can't beat someone with actual experience of the machine your converting.
While Gary and Me have plenty of experience we don't have any on what's inside that exact machine. i2i Does and will know exactly what you can keep and what can be disguarded.
He's say's it's an easy enough conversion so I suspect he knows how to connect to any existing Motion controller built into the machine so you may not have to buy one at all.!!

Do your self a favor and speak to him before doing anything.!! (If you haven't all ready.)

Edit: Regards Moving it. !hink like an egyption.!!!. . . . They moved stones the size of your house with levers and logs.!!!
I have, extensively. We had an hour long call yesterday.

His view was that the machine should be retrofitted and that the existing controller is a waste of time.

Where he does not have experience is in the area of the CS Labs IP-A / S systems. This is where you / Gary come into the picture :-)

Ill post some pics a bit later once I have drawn them of what I believe the connectivity might be between IP-A and the current wiring, but I am not sure on this and will ask for feedback / guidance.

Thanks