Denford Triac VMC with ATC Conversion / Fix

[Chaz]

That's certainly a tight fit.
Any idea what size flange is on the motor?

I think a 100mm flange motor would squeeze in, however I couldn't find any with the power I was aiming for, so opted for a 110mm motor, and spacing it up.

The plate that goes across for the DC motor is 115mm x 110mm (Depth).

The motor mount bolts are 81mm across from C to C. The recess flange is 100mm.

This is the motor mount for my Thor machine Y Axis (same motor as used on my Denford for spindle here).