Machine shop

[Boyan Silyavski]

HI,
welcome to the forum!

Hi
Sorry about that, should be http://jamakengineeringltd.com/ as the good man above says.

http://stackoverflow.com/questions/1...is-not-working

Yours is the case where its on the server side the problem, cause shows same ip for both, so its not a DNS issue. Basically a configuration issue.

anybody got any good ideas for things to manufacture[/COLOR]

I have a ton of ideas. Not sharing them freely around though. It seems having ideas is the most difficult thing these days.

So what is what you aim for? Partnership,just making parts,sponsoring a project, making a product, etc...?



Why are you referring to yourself as "we", i mean at the web site. May be you would be most trustworthy if you say I, so people will know they will get personal attention, not just some employee in a company.


I am sometimes "we" , but when i speak with people i say "I", so people know who exactly they are dealing with.

[JAZZCNC]

I am sometimes "we" , but when i speak with people i say "I", so people know who exactly they are dealing with.

Do you some times say "My Precious" as well.!!!. . . Gollum gollum. . .

[Wal]

It seems having ideas is the most difficult thing these days.

Always has been, hasn't it..?

I tend to visit sites like tumblr and pinterest (search "DIY CNC") for a bit of inspiration - you can spend hours scrolling through a feed of custom made odds and sods, some of it really quite beautiful and considered. That normally gets the creative part of my mind ticking...

Welcome to the forum.

Wal.

[GEOFFREY]

Hi, welcome to the forum. Some years ago I used to buy silicone mould rubbers from a firm called JAMAK. As it is an unusual name I wondered if there is a connection? I think that firm was a husband and wife set up, which could easily explain the "we". Anyway as has already been stated sometimes having the ideas is the difficult part!!! Good luck with whatever you try. G.

[JAMAK]

Thanks everyone for your good wishes, it is a husband and wife set up at the moment but who knows what lies ahead in life, it was not us who did those silicon parts for you , but we have been going since 2007 on and off and we have gone in the CNC side now, this seems a really good forum.