. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 17-09-2015 #38
    Davek0974's Avatar
    Lives in Bishops stortford, United Kingdom.
    Davek0974
    Last Activity: 20-12-2024 Has been a member for 9-10 years. Has a total post count of 1,165. Received thanks 78 times, giving thanks to others 226 times.
    30A consumables arrived today, gave them a spin on 1.2mm 304 stainless and got excellent results As good as the finecuts on the 30XP were at least.

    Both pics as they came off the table...

    Top...



    Bottom...



    Voltage was low as normal it seems, 76v instead of book 98v but speed was bang on at 4000mm/min, pierce height 2.5mm, cut height 0.5mm. Still need to dial the THC in as its a bit unstable on thin stuff but at least it works and the table is now producing paying work.
    Reply With Quote Reply With Quote

  2. The Following 2 Users Say Thank You to Davek0974 For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New Build-12x6ft Plasma Table
    By F1transportationserv in forum Plasma Table Machines
    Replies: 23
    Last Post: 04-07-2015, 12:14 AM
  2. Plasma table build, first question....
    By Davek0974 in forum Plasma Table Machines
    Replies: 51
    Last Post: 01-08-2014, 03:11 PM
  3. 4' x 4' plasma table build in Canada
    By 190-v8 in forum Plasma Table Machines
    Replies: 0
    Last Post: 29-01-2014, 12:27 AM
  4. BUILD LOG: Let The Fun Begain, New build on the Table.
    By Bush Flyer in forum DIY Router Build Logs
    Replies: 63
    Last Post: 20-11-2013, 09:19 PM
  5. 3M x 2M Plasma table build
    By MonoNeuron in forum DIY Plasma Build Logs
    Replies: 14
    Last Post: 01-09-2009, 11:11 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules