Random Erratic Possible Stalling Problem with router

[Earle]

Update:

i would like like to thank the contributors to this thread. I have run many jobs recently and just run several jobs for clients that have taken 4.5hrs plus each without any failures hitches etc.

so it appears that lowering the current setting on the drivers has completely solved the reliability issue that I had, the relief is palpable ;-))

earle

[Clive S]

Update:

i would like like to thank the contributors to this thread. I have run many jobs recently and just run several jobs for clients that have taken 4.5hrs plus each without any failures hitches etc.

so it appears that lowering the current setting on the drivers has completely solved the reliability issue that I had, the relief is palpable ;-))

earle

Ok Earle that's good news I would change out the electronics when you can with a higher voltage p.s. it will then be a different machine