Thread: Small but strong cnc machine
Threaded View
-
05-07-2015 #1
Good evening.
I would like to present a project that I did recently for a friend of mine in order to serve as an inspiration to those who seek a small but robust machine. This machine despite being small would have to have sufficient strength to cut carbon aluminum and plastics mainly.
The overall size of the machine shall not exceed the 62cmx42cmx45cm
I will leave a description of the material used in construction.
Aluminum alloy chassis 5083 with 10mm thick.
Linear guides Ø20 with SC20UU bearings in the x and y axis.
Linear guides Ø16 with SC16UU bearings in Z.
1605 ballscrews in all axis.
Nema 23 size motors 2NM force in the x and y axis.
Motor Nema 23 1NM the axis Z.
TB6560 drivers in all axis.
15A 24V power supply.
Here I leave a few drawings of the project, and later I will take pictures of what is already done.
Any question just ask.
Best Regards
Alex
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: A sufficiently strong machine
By Jonathan in forum DIY Router Build LogsReplies: 42Last Post: 29-03-2014, 10:40 PM -
eBay: small milling machine Sieg Super X3
By Fivetide in forum Items On eBay UKReplies: 0Last Post: 19-11-2012, 01:48 PM -
WANTED: Small Milling machine
By pmcb1011 in forum Items WantedReplies: 1Last Post: 10-02-2012, 10:07 PM -
1st CNC Mill for small machine shop
By newtoid1986 in forum Milling Machines, Builds & ConversionsReplies: 1Last Post: 05-09-2011, 10:47 PM -
WANTED: small(ish) manual milling machine
By diy-john in forum Items WantedReplies: 0Last Post: 22-02-2011, 09:04 PM
Bookmarks