Thread: Boxford tlc 160 motor
Hybrid View
-
30-04-2020 #1
Last Activity: 30-04-2020
I modified the motor mount from the machine . I fitted spacers to fit the motor and fit the pully to the motor shaft . The spacers push the motor out so the pully lines up. the motor pully guard is cut to cover the new motor that is now on the outside of the machine . Sounds a bodge but it looks and works quite well . I use TEC 2.2 KW 3 Phase 2 pole Motor 230/400V 50HZ Foot Mount 3 phase B14 mount. got the motor slightly wrong in last post.
Last edited by keith wainwright; 30-04-2020 at 09:03 PM.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CONVERSION: Boxford TCL 160
By Saracen in forum Conversion Build LogsReplies: 38Last Post: 01-08-2021, 05:50 PM -
AC servo motor to replace a 3 phase induction motor on a mill spindle.
By rnr107 in forum Spindles & Drive MotorsReplies: 2Last Post: 23-04-2014, 03:14 PM -
Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
By craynerd in forum Motor Drivers & ControllersReplies: 1Last Post: 16-03-2014, 07:29 PM -
servo motor as spindle motor
By Scott in forum General DiscussionReplies: 1Last Post: 03-10-2010, 06:42 PM
Bookmarks